Biomaterials, Biodegradables and Biomimetics Research Group

Papers in Scientific Journals

Custom-Tailored Tissue Engineered Polycaprolactone Scaffolds for Total Disc Replacement

Abstract

Degeneration of the intervertebral disc (IVD) represents a significant musculoskeletal disease burden. Tissue Engineering has been proposing several strategies comprising the use of biodegradable materials to prepare
scaffolds that can present similar mechanical properties to native IVD tissues. However, this might be insufficient, since the patient’s intervertebral space geometry must be replicated to allow the appropriate
implant fixation and integration. Herein, it is proposed the use of Reverse Engineering and Rapid Prototyping techniques applied to rabbit models aiming to prepare custom-tailored annulus fibrosus scaffolds. The IVD
reverse engineered architecture was obtained by means of micro-Computed Tomography acquisition and three-dimensional modelling, resulting in a computer-aided design that replicates the original rabbit IVD. Later, a fused deposition modelling three-dimensional printer was used to produce the scaffolds with different geometries from the computer-aided design, using polycaprolactone (PCL) with 100% infill density. The
microstructure of the PCL scaffolds was investigated by scanning electron microscopy (SEM), which allowed observing an adequate fusion adhesion between layers. The SEM images revealed that, until a moderate
resolution, the porosities manually designed in the computer-aided design model were successfully replicated. The PCL scaffolds’ three-dimensional architecture was also assessed by means of micro-Computed Tomography analysis. Compressive stiffness was determined using a mechanical testing system. Results showed higher values as compared to that of human IVDs (5.9-6.7 kN/mm vs. 1.2 kN/mm, respectively). In vitro studies were performed to investigate possible cytotoxicity of the polycaprolactone scaffolds’ leachables. The results showed that the custom-tailored PCL scaffolds do not have any deleterious cytotoxic effect over annulus fibrosus cells and mouse lung fibroblasts cell line. This study proposed a simple,rapid and low-cost strategy to fabricate custom-tailored annulus fibrosus scaffolds. In the future, this strategy might be used in association with nucleus pulposus regeneration strategies that can possibly allow developing tissue engineered total disc replacement implants specific to each patient, aiming at full IVD regeneration.

Journal
Biofabrication
Volume
7
Issue
1
Pagination
015008
Publisher
IOP Publishing
URL
http://iopscience.iop.org/1758-5090/7/1/015008/
Keywords
Computer-Aided Tissue Engineering, Custom-Tailored, intervertebral disc, Rapid prototyping, Reverse Engineering, Tissue engineering
Rights
Restricted Access
Peer Reviewed
Yes
Status
published
This website uses cookies. By using this website you consent to our use of these cookies. For more information visit our Policy Page.